Honda Pilot: Cargo Area Light Removal, Installation, and Test

Removal/Installation

1. Cargo Area Light - Remove

Cargo Area Light: 8W

1. Carefully pry off the lens (A).
2. Remove the bulb (B).
3. Remove the cargo area light housing (C).
4. Disconnect the connector (D).

2. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Test

1. Cargo Area Light - Test

NOTE: When doing the cargo area light test, make sure to install the bulb correctly.

1. Check for continuity between the terminals in each switch position according to the table.
2. If the continuity is not as specified, replace the bulb(s) or the rear individual map light (A).

Cargo Area Accessory Power Socket Removal and InstallationCarpet Removal and Installation