Honda Pilot: Engine Oil Replacement

Replacement

1. Engine - Warm Up

1. Allow the engine to reach operating temperature (fan comes on at least twice).

2. Vehicle - Lift

3. Engine Oil - Drain

1. Remove the drain bolt (A), and drain the engine oil.
2. Reinstall the drain bolt with a new washer (B) and torque to specification.

4. Engine Oil - Refill

1. Refill the engine with the recommended engine oil.

Capacity

At Oil Change: 5.1 L (5.4 US qt)

At Oil Change including

Filter: 5.4 L (5.7 US qt)

After Engine Overhaul: 6.1 L (6.4 US qt)

5. Engine Oil Level - Check

1. Run the engine for more than 3 minutes, then check the oil level and the oil leakage.

6. Maintenance Minder - Reset (With Maintenance Minder System)

1. If the Maintenance Minder required to replace the engine oil, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder"). If the Maintenance Minder did not require to replace the engine oil, reset the Maintenance Minder with the HDS (see "Resetting the Individual Maintenance Items").

Engine Oil Pump Removal and InstallationEngine Removal and Installation