Honda Pilot: Transmission Fluid Pressure Switch C (4th Clutch) Removal and Installation

Removal/Installation

1. Vehicle - Lift

2. Splash Shield - Remove

3. Transmission Fluid Pressure Switch C (4th Clutch) - Remove

1. Disconnect the connector (A).
2. Remove transmission fluid pressure switch C (4th clutch) with the sealing washer (B).

4. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

NOTE:

• Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
• Be sure to use a new sealing washer when installing transmission fluid pressure switch C (4th clutch) .
• Tighten the switch by gripping the metal part, not the plastic part.
• If necessary, add ATF to the proper level.

Transmission Fluid Pressure Switch B (3rd Clutch) Removal and InstallationTransmission Fluid Pressure Switch D (5th Clutch) Removal and Installation