Honda Pilot: ATF Hose Removal and Installation

Removal

1. ATF Hose - Remove

1. Remove the ATF hose as needed.

Installation

NOTE: When installing the hose clips, make sure they do not interfere with the surrounding parts.

1. ATF Hose - Install

1. Connect the ATF hoses over the ATF lines with the clamps at the appropriate points in reference to the following list.

• Align the yellow paint mark (J) on the ATF hose end with the paint mark (K) on the ATF warmer.
• Align the blue paint mark (M) on the ATF hose end with the paint mark (N)on the ATF line.

2. ATF - Level Check

ATF Filter Removal and InstallationATF Level Check