Honda Pilot: Dashlights Brightness Control Switch Test

Test

1. Meter Visor - Remove

2. Dashlights Brightness Control Switch - Test

1. Check for continuity between the terminals in each switch position according to the table.

NOTE:

• When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
• Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

2. If the continuity is not as specified, replace the dashlights brightness control switch (A).

3. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

D4 Switch TestDoor Key Cylinder Switch Test