Honda Pilot: Front Door Latch Removal and Installation

Removal/Installation

1. Front Door Panel - Remove

2. Front Door Plastic Cover - Remove (as needed)

3. Front Door Panel Barrier B - Remove (For Some Models)

4. Front Door Inner Handle - Remove

1. Disconnect the inner handle cable (A) and the latch cable (B) from the inner handle (C).

5. Front Door Center Lower Channel - Remove

1. Pull the glass run channel (A) away as needed.
2. Remove the front door center lower channel (B).

6. Front Door Latch - Remove

1. Remove the bolts with a TORX T30 bit.
2. Driver's side: Pull and rotate the front door latch (A) to disconnect the cylinder rod (B).
3. Pull the front door latch downward to disconnect the outer handle rod (C), and then remove the front door latch.

   NOTE: Be careful not to bend the cables (D).

4. Open the latch protector cover (A).

5. Disconnect the inner handle cable (A) and the latch cable (B) from the front door latch (C).

7. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Front Door Glass Removal and InstallationFront Door Lower Trim Removal and Installation