Honda Pilot: Front Door Glass Removal and Installation

Removal/Installation

1. Front Door Panel - Remove

2. Front Door Plastic Cover - Remove

1. Remove the plug caps (A).
2. Disconnect the connectors (B).
3. Remove the harness clips (C).
4. Remove the front door plastic cover (D).

   NOTE: If the plastic cover is damaged or torn, replace it with a new one.

3. Front Door Panel Barrier A/B - Remove

1. Remove the front door panel barrier A and front door panel barrier B. (for some models)

4. Front Door Glass - Remove

1. Lower the front door glass (A) until you can see the bolts, and then remove them.
2. Carefully pull out the front door glass through the window slot.

   NOTE: Be careful not to drop the front door glass inside the door.

5. Power Mirror - Remove

6. Front Door Quarter Glass- Remove

1. Remove the front door weatherstrip (A) as needed.
2. Remove the bolts (B) and the screw (C) securing the front quarter channel (D).

3. Remove the glass run channel (A) and the front quarter channel (B).

4. Remove the front quarter channel (A) from the glass run channel (B).

5. Carefully slide out the front door quarter glass (A), and remove it.

   NOTE: Be careful not to damage the door glass outer weatherstrip (B).

7. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Front Door Gap Seal Removal and InstallationFront Door Latch Removal and Installation