Honda Pilot: Front Door Outer Molding Removal and Installation

Removal/Installation

1. Front Door Outer Molding - Remove

1. Pull away the front door weatherstrip (A) and remove the clip.
2. Remove the screw and the hook (B).

3. Pull out the upper edge of the front door outer molding (A) from the edge of the sash, and cut the double-sided adhesive tape (B) with a utility knife, and then remove the molding from the sash.

   NOTE: Replace it with a new front door outer molding.

2. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

NOTE :

• Carefully remove the remaining double-sided adhesive tape from the sash, and then clean the sash surface with a shop towel dampened with isopropyl alcohol.
• Install the new front door outer molding.

Front Door Outer Handle Removal and InstallationFront Door Panel Removal and Installation