Honda Pilot: Front Individual Map Light Removal, Installation, and Test

Removal/Installation

1. Front Individual Map Light - Remove

Front Individual Map Light: 5 W

1. Turn the front individual map light switch OFF.
2. Carefully pry off the lenses (A).
3. Remove the front individual map light (B).
4. Disconnect the connectors (C).
5. Remove the bulb(s) (D).

2. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Test

1. Front Individual Map Light - Test

NOTE: When doing the front individual map light test, make sure to install the bulbs correctly.

1. Check for continuity between the terminals in each switch position according to the table.
2. If the continuity is not as specified, replace the bulb(s) or the front individual map light (A).

Front Inner Fender Removal and Installation

Removal/Installation

1. Front Inner Fender - Remove

1. Canada models: Remove the front splash guard (A).

2. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Front Grille Trim Removal and InstallationFront Knuckle/Hub/Wheel Bearing Replacement