Honda Pilot: Shift Solenoid Valve C Removal and Installation

Removal and Installation

1. Vehicle - Lift

2. Splash Shield - Remove

3. Shift Solenoid Valve C - Remove

1. Remove the harness clamp (A).

2. Disconnect the connector (A).

3. Remove shift solenoid valve C with the O-rings (A).

4. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

   NOTE:

   • Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
   • Be sure to use new O-rings when installing shift solenoid valve C.
   • If necessary, add ATF to the proper level.

Shift Lever Removal and InstallationSide Airbag Removal and Installation