Honda Pilot: Steering Heater Test

Test

NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

1. Driver's Airbag - Remove

2. Steering Heater - Test

1. Disconnect the connector (A).
2. Check for continuity between the terminals according to the table. There should be continuity.

   NOTE: When the steering heater temperature is 73 ºF (23 ºC), resistance value is 2.0+-0.20 Ω.

3. If the continuity is not as specified, the steering heater (B) is faulty; replace the steering wheel assembly.

3. All Remove Parts - Install

1. Install the parts in the reverse order of removal.

Starter Solenoid TestSunlight Sensor Test