Honda Pilot: Water Pump Inspection

1. Timing Belt - Remove

2. Water Pump - Inspect

1. Turn the water pump pulley counterclockwise, and check that it turns freely. If it does not turn freely, replace the water pump.

   NOTE: When you check the water pump, you may see a small amount of "weeping" from the bleed holes (A). This is normal.

3. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

4. Maintenance Minder - Reset (With Maintenance Minder System)

1. If the Maintenance Minder required to inspect the water pump, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").

Valve Stem-to-Guide Clearance InspectionWheel Bearing End Play Inspection