Honda Pilot: 1st Gear One-Way Clutch Inspection

Inspection

1. 1st Gear One-Way Clutch - Assemble

1. Install the 53 x 57 x 20 mm needle bearing (A) and 1st gear(B) on the park gear (C).

2. 1st Gear One-Way Clutch - Inspect

1. Hold the park gear (A), and turn 1st gear (B) in the directionshown to be sure it turns freely. Also make sure 1st gearlocks in the opposite direction.
2. If any problem occurs on the 1st gear one-wayclutch,replace 1st gear.

NOTE: The 1st gear one-way clutch is not available separately from 1st gear.

USB Adapter Connector for Inputs and OutputsA/C System Contamination Inspection