Honda Pilot: A/T Clutch Pressure Control Solenoid Valve A, B, C, and D Test

Test

1. HDS DLC - Connect

2. A/T Clutch Pressure Control Solenoid Valve - HDS Function Test

1. Select Clutch Pressure Control (Linear) Solenoid Valve A, B, C, and D individually in the Miscellaneous Test Menu with the HDS.
2. Test A/T clutch pressure control solenoid valve A, B, C, and D individually with the HDS.

• If the valves tests OK, the test is complete. Disconnect the HDS.
• If any of the valves do not test OK, follow the instructions on the HDS.
• If any of the valves do not test OK, and the HDS does not determine the cause, go to the next step, and test A/T clutch pressure control solenoid valve A, B, C, and D.

3. Front Bulkhead Cover - Remove

4. Air Intake Tube - Remove

5. 12 Volt Battery - Remove

6. 12 Volt Battery Box - Remove

1. Disconnect the connector (A).

7. A/T Clutch Pressure Control Solenoid Valve Connector - Disconnect

1. Disconnect the A/T clutch pressure control solenoid valve A, B, C, or D connector.

8. A/T Clutch Pressure Control Solenoid Valve - Resistance Check

*: Terminal side of male terminals

1. Measure the resistance between terminals No. 1 and No. 2 for each A/T clutch pressure control solenoid valve A, B, C, and D.

Standard: 4.7－5.9 Ω

• If the resistance is out of the standard, replace the secondary valve body.
• If the resistance is within the standard, go to the next step, and check each A/T clutch pressure control solenoid valve A, B, C, and D operation.

9. A/T Clutch Pressure Control Solenoid Valve - Operation Check

*: Terminal side of male terminals

1. Connect a jumper wire from the negative battery terminal to A/T clutch pressure control solenoid valve A, B, C, and D connector terminal No. 1, and connect another jumper wire from the positive battery terminal to connector terminal No.2 individually.

• If an operating sound is heard, the A/T clutch pressure control solenoid valve is OK. Go to the next step, and install all removed parts.
• If no operating sound is heard, replace the secondary valve body.

10.A/T Clutch Pressure Control Solenoid Valve Connector - Connect

1. Connect the A/T clutch pressure control solenoid valve A, B, C, or D connector.

11.12 Volt Battery Box - Install

1. Connect the connector (A).

12.12 Volt Battery - Install

13.Air Intake Tube - Install

14.Front Bulkhead Cover - Install

A/C System TestA/T Pressure Test