Honda Pilot: Air Cleaner Element Removal, Installation, and Inspection

Removal/Installation

1. Air Cleaner Element - Remove

1. Open the air cleaner housing cover (A).
2. Remove the air cleaner element.

2. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

   NOTE: If the idle speed fluctuates, do the idle speed inspection.

3. Maintenance Minder - Reset (With Maintenance Minder System)

1. If the Maintenance Minder required to replace the air cleaner element, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").

Inspection

1. Air Cleaner Element - Inspect

1. Check the air cleaner element for damage or clogging. If it is damaged or clogged, replace it.

   NOTE: Do not use compressed air to clean the air cleaner element.

2. Clean and remove any debris from inside the air cleaner.

A/T Differential Carrier Bearing Preload InspectionAPP Sensor Signal Inspection