Honda Pilot: Cylinder Head Inspection for Warpage

Inspection

1. Cylinder Head - Remove

2. Camshaft - Remove

3. Cylinder Head Warpage - Inspect

1. Check the cylinder head for warpage. Measure along the edges, and three ways across the center:

• If warpage is less than 0.05 mm (0.002 in), cylinder head resurfacing is not required.
• Maximum resurface is limited to the cylinder head height standard as shown.

Cylinder Head Warpage

  Standard (New): 0.05 mm (0.002 in) max.

Cylinder Head Height

  Standard (New): 120.95－121.05 mm (4.7618－ 4.7657 in)

4. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Crankshaft and CKP Pulse Plate Removal, Installation, and InspectionDrive Belt Auto-Tensioner Inspection