Honda Pilot: Dashboard Meter Visor Removal and Installation

Removal/Installation

1. Both Dashboard Side Lid - Remove

2. Driver's Dashboard Lower Cover - Remove

3. Passenger's Dashboard Trim Panel - Remove

4. Dashboard Center Panel - Remove

5. Dashboard Center Middle Trim - Remove

6. Dashboard Meter Visor - Remove

1. Adjust the steering column to the full tilt down position, and to the full telescopic out position.
2. Remove the dashboard meter visor blind cover (A).

3. Remove the dashboard meter visor (A), and then disconnect the connector (B).

7. Dashboard Meter Visor Blind Assembly - Remove

1. Remove the dashlights brightness control switch.
2. Remove the screw, and then release the hooks (A).
3. Remove the dashboard meter visor blind assembly (B).

8. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Dashboard Center Speaker Trim Removal and InstallationDashboard Removal and Installation