Honda Pilot: Engine Oil Jet Replacement

Replacement

1. Crankshaft - Remove

2. Oil Jet and Oil Jet Bolt - Remove

3. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Engine Oil Level Check

Check

1. Engine Oil Level - Check

1. Park the vehicle on level ground, and start the engine. Hold the engine speed at 3,000 rpm with no load (in P or N) until the radiator fan comes on, then turn off the engine, and wait more than 3 minutes.
2. Remove the dipstick, and wipe off the dipstick, then reinstall the dipstick.
3. Remove the dipstick, and check the engine oil level. It should be between the upper mark (A) and the lower mark (B).
4. If the engine oil level is near or below the lower mark, check for oil leakage, and add engine oil to bring it to the upper mark.

Engine Oil Filter Removal and InstallationEngine Oil Pan Removal and Installation