Honda Pilot: Injector Control Module Removal and Installation

Removal/Installation

1. 12 Volt Battery Terminal - Disconnect

2. Engine Cover - Remove

3. Injector Control Module Cover - Remove

1. Remove the bolts (B).
2. Remove injector control module cover A.

4. Injector Control Module - Remove

1. Disconnect the connectors (A), then remove the injector control module (C).
2. Remove injector control module cover B from the injector control module.

5. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Ignition Coil and Spark Plug Removal and InstallationInjector Removal and Installation