Honda Pilot: Rear Bumper Lower Face Removal and Installation

Removal and Installation

1. Rear Bumper Lower Face - Remove

1. Remove the rear bumper lower face (A).

2. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Rear Bumper Removal and Installation

Removal/Installation

1. Rear Wheel Arch Protector - Remove

2. Rear Bumper - Remove

1. Remove the bolts (A), the screws (B, C), and the clips (D).

2. Pull out the rear bumper (A) at the wheel arch area to release it from the hooks (B) on the side spacer.

3. With the help of an assistant, while pulling the rear bumper (A) away from the side spacer (B), release the bumper from the hook (C) on the side spacer and the hooks (D) on the bumper side bracket (E).

4. With the help of assistant, pull out the rear bumper (A) to release it from the hooks (B) on the upper brackets.
5. Disconnect the connectors (C). (for some models)
6. Remove the rear bumper.

3. Bumper Side Spacer - Remove

1. If necessary, remove the bumper side spacer (A).

4. Bumper Side Bracket - Remove (if necessary)

1. Remove the taillight.
2. Remove the bumper side bracket (A).

5. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

Rear Brake Pad Removal and InstallationRear Bumper Skid Trim Removal and Installation