Honda Pilot: Side Engine Mount Removal and Installation

Removal/Installation

1. 12 Volt Battery Terminal - Disconnect

2. Engine - Support

1. Lift and support the engine with a jack and a wood block under the oil pan.

3. Upper Half of Side Engine Mount Bracket - Remove

1. Disconnect the ground cable (A).
2. Remove the harness clamp bracket (B) and the upper half of side engine mount bracket.

4. VSA Modulator-Control Unit with Bracket - Move

NOTE: Do not disconnect the brake lines.

5. Side Engine Mount - Remove

6. All Removed Parts - Install

1. Install the parts in the reverse order of removal.

   NOTE:

   • Do the mounts tightening procedure before tightening all of the mounts' bolts and nuts.
   • Install the VSA modulator-control unit with bracket after tightening the side engine mount mounting bolts.

Side Curtain Airbag Removal and InstallationSide Impact Sensor (First) Removal and Installation