Honda Pilot: Torque Converter Housing Differential Oil Seal Replacement

Replacement

NOTE: Unless otherwise indicated, illustrations used in the procedure are for AWD.

1. Differential Oil Seal - Remove

2. Differential Oil Seal - Install

1. Install the differential oil seal flush with the torque converter housing using the 15 x 135L drive handle and the 58 mm oil seal driver attachment.

Special Tool Required

• Driver Handle, 15 x 135L 07749-0010000

• Oil Seal Driver Attachment, 58 mm 07JAD-PH80101

Torque Converter Housing Differential Carrier Bearing Outer Race ReplacementTorque Converter Housing Idler Gear Shaft Bearing Replacement