Honda Pilot: Torque Converter Housing Selector Control Shaft Bearing Replacement

Replacement

1. Selector Control Shaft Bearing - Remove

1. Remove the selector control shaft bearing (A) using the 15 mm remover shaft, the 15 mm remover head, and the slide hammer.

2. Selector Control Shaft Bearing - Install

1. Install the selector control shaft bearing until it bottoms using the 15 x 135L driver handle and the 32 x 35 mm bearing driver attachment.

Special Tool Required

• Bearing Driver Attachment, 32 x 35 mm 07746-0010100

• Driver Handle, 15 x 135L 07749-0010000

• Remover Shaft, 15 mm 07936-KC10100

• Remover Head, 15 mm 07936-KC10200

• Slide Hammer 07936-371020A

Torque Converter Housing Secondary Shaft Bearing ReplacementTransfer Assembly Fluid Replacement