Honda Pilot: Transfer Assembly Fluid Replacement

Replacement

1. Vehicle - Lift

2. Transfer Assembly Fluid - Replace

1. Remove the filler plug (A) with the sealing washer (B).
2. Remove the drain plug (C) with the sealing washer (D), and drain the transfer assembly fluid.
3. Reinstall the drain plug with a new sealing washer.
4. Refill the transfer assembly with the recommended fluid through the filler hole (E) until the fluid flows out. Use an Honda HGO-1.

Transfer Assembly Fluid Capacity:

0.43 L (0.45 US qt) at fluid change

0.45 L (0.48 US qt) at overhaul

5. Reinstall the filler plug with a new sealing washer.

Torque Converter Housing Selector Control Shaft Bearing ReplacementTransfer Assembly Removal and Installation